Skip to main content

Our Blogs

air conditioner leak

How to Check for an Air Conditioning Leak in Corrigan, Texas

By HVAC Expert | Air Conditioning Services

Is the inside of your Corrigan, TX home on the warmer side despite the fact that your air conditioning system is turned on? If so, any number of things might be wrong with your AC system.

But more often than not, it’ll be an indication that you have an air conditioner leak on your hands. It’s going to put you in a position where you’ll need to have refrigerant added to your AC system all the time to help it cool off your home.

Instead of doing this, you should arrange to have a Corrigan, Texas HVAC company repair your AC leak. It’ll stop your AC system from leaking refrigerant and enable it to keep your home comfortable at all times.

As a homeowner, you should know how to check for an air conditioner leak in Corrigan, TX so that you can have it fixed. See how to do it below.

Look for Signs of an Air Conditioner Leak

If your home feels warmer than it should be in spite of your AC system is turned on, that’ll be the most obvious sign that you have an air conditioner leak in Corrigan, TX. But that isn’t the only sign that might suggest you have an air conditioner leak on your hands.

Here are a few other signs that might indicate you have an air conditioner leak:

  • The air in your home is unusually humid
  • Your home’s air conditioner doesn’t ever seem to turn off
  • Your utility bills are through the roof
  • Ice is building up around your AC system’s condenser coils
  • There is a hissing sound coming from your AC system

If you spot any of these signs, you should stop using your AC system as soon as you can and see if you have an air conditioner leak. It’ll show you that you need to schedule HVAC repair in Corrigan, Texas.

Check for an Air Conditioner Leak

If you notice any of the signs we just mentioned and suspect you might have an air conditioner leak in Corrigan, TX, you should investigate the situation further. There are a few ways that you can check for an HVAC leak.

First and foremost, you can stand near your AC system while it’s turned on and listen for the hissing sound that we just alluded to. If you hear it, that is more than likely going to tell you that your AC system is leaking refrigerant. It’s often the sign of a pinhole leak in a hose in your system.

You can also bring a Corrigan, Texas HVAC company that specializes in dealing with AC issues on board to conduct further tests on your AC system. Here is what they’ll do to identify the presence of a leak:

  • Apply soapy water to the hose that might be leaking to see if it bubbles up and pinpoints the location of a leak
  • Inject an ultraviolet dye into your AC system’s refrigerant and use a UV light to identify a leak
  • Utilize an electronic leak detector to find an AC leak

In some cases, an HVAC company will only need to use one of these methods to find an air conditioner leak. But in others, they might need to use two or even three of them to find where your AC system has sprung a leak.

Understand the Risks of an Air Conditioner Leak

The good news for those who have an air conditioner leak is that it shouldn’t be too difficult to fix. Any good HVAC repair company will be able to find a leak and repair it in no time.

But you might put your entire AC system at risk if you choose not to act quickly when you have a leak. It could put a serious strain on your AC system and force it to work so much harder than it would have to otherwise.

The refrigerants that are used in AC systems are also toxic, and they could make you sick or even prove to be fatal if you inhale them. For each of these reasons, you shouldn’t delay having an air conditioner leak fixed sooner rather than later.

Find an HVAC Company to Fix an Air Conditioner Leak

Do you have an air conditioner leak in your home? As we just mentioned, you shouldn’t put off having it fixed. If you do, it could take a toll on both your AC system and possibly even you and the others living in your home.

Rather than letting an air conditioner leak in Corrigan, TX linger, it’ll be important to have an HVAC company come out to your home to set you up with AC services. The HVAC company you hire to help you should have the following qualities:

  • Plenty of experience
  • The ability to repair a wide range of AC issues
  • Affordable prices
  • Enough availability to help you fix an AC leak fast

If you bring the wrong HVAC company on board to assist you with an air conditioner leak, it could make a bad situation worse. It’s why you should rely on the right company to help you repair your air conditioner leak in Corrigan, TX.

Let Us Repair an Air Conditioner Leak for You

Have you checked for an air conditioner leak in Corrigan, TX, and found evidence of what you believe to be a leak? If you have, we would love to handle repairing it for you.

We can send someone from our talented team of AC technicians out to work on your home’s AC system right away. We can fix your air conditioner leak and have your AC system running like normal again.

Contact us whenever you need to have AC or heating issues fixed. We serve those in Corrigan, TX as well as those in Livingston, TX, Point Blank, TX, Cold Spring, TX, Woodville, TX, and Onalaska, TX.

heating repair services

7 Signs You Need to Hire Heating Repair Services for Your Home in Corrigan, TX

By HVAC Expert | Service Area

About 61% of Texas homes rely on electricity to keep them warm during the winter. But if your heater isn’t working well, you won’t be able to enjoy the warm, comfortable home you’ve worked so hard to create. Fortunately, there’s a solution: heating repair services in Corrigan, TX.

These professionals are trained to diagnose and fix any HVAC problems you may experience so that you can get back to relaxing in your home. Read on for seven common signs that you need to call an HVAC technician.

1. Strange Noises

It’s normal for your furnace to make some noise. However, if you hear any banging, screeching, or clanking, it’s time to call in a professional.

A loose motor bearing can be the source of a clanking noise. Screeching and banging could hint at worn-down parts or loose bolts. No matter the cause, a heating repair is necessary to avoid further damage.

2. The Furnace Doesn’t Start

Dirty filters cause insufficient airflow, which prevents your heating system from starting. Your gas line may also be malfunctioning or your thermostat could be set incorrectly.

If the wires inside your thermostat are loose or broken, your furnace will not work. Checking the wiring is difficult to do on your own, so it’s best to contact a professional.

Another reason your furnace isn’t starting is a faulty capacitor. The capacitor helps start and run the motor that provides heat to your home.

A technician can test this component to see if it needs replacing. Otherwise, you might need a new furnace altogether.

You may also have a dirty blower motor. A furnace’s blower motor pulls air from inside your home, heats it, then pushes it back into the air ducts. If there’s too much dirt on the blower motor, it will be impossible for the furnace system to operate at full capacity.

3. Uneven Heating

One of the biggest problems with a broken heater is that it doesn’t produce even temperatures throughout the house. Instead, one room will feel too warm while another feels too cold.

Restricted airflow between the furnace and vents can lead to this problem. Poor air circulation will make it difficult to keep rooms in your home at comfortable temperatures.

Some other factors may also be at play here, such as poorly installed ductwork.

4. Higher Energy Bills

Energy prices are higher in Texas than in other states because it’s the largest natural gas-consuming state in the nation. But if you see a shocking increase in your bills, you may have leaky ductwork.

Other times, people might experience higher monthly energy bills because of poor insulation throughout their homes. This is the result of shabby construction practices during the initial building stages.

Only a professional can identify the source of your high energy bills and help you get them back under control.

5. Poor Air Quality

If your home’s air quality is poor, your residential heater may be an easy target for blame. Improper filtration or using an outdated filter system can lead to increased levels of pollutants in your home’s air supply. Heating repair services can replace your filters to improve the overall healthiness of the air flowing through your home.

Sometimes your heating system has nothing to do with the decrease in air quality. The problem might be something as simple as dust on the air vents. To rule out this possibility, clean your air vents before contacting a heating repair service.

6. Unpleasant Smell

When your heater is in good condition, the smell may be very pleasant and remind you of summer. However, if you smell plastic, rubber, or burning odors, this could mean that something has become lodged in your heating system. You must remove these items immediately, as they can become dangerous and lead to a fire.

Suppose the smell is coming from inside the unit. If that’s the case, your heating system may be full of dust that’s causing it to overheat. It could also mean there’s an electrical wiring problem.

If you smell gas or experience an unexplained burning smell in your home, turn off the heater and call a heating repair service immediately. There could be a gas leak in your home.

7. Yellow Pilot Light

A natural gas flame burns blue. If it’s yellow, too much air may be getting into the system. This can be caused by a dirty pilot light tube or an improperly adjusted gas valve.

When your air tube is blocked, it will starve the flame of oxygen. Because of this, the flame won’t burn properly. This will cause a yellow or orange fire.

If the tube has a little dirt in it, only part of the flame will be yellow. If there’s a large amount of debris blocking the airflow, then all parts of the flame will have a yellowish tint.

Because it allows carbon monoxide to leak into your home’s air, a yellow pilot light is also dangerous.

Contact Heating Repair Services in Corrigan, TX

Your heating system might be broken or it could just be time for some maintenance. If you’re looking for the best heating repair services in Corrigan, Texas, look no further than Best Air Conditioning and Heating.

We’re a family-owned company that knows how important it is for your home to be comfortable and energy-efficient. Our 35+ years of experience in the HVAC industry means you’ll always be in expert hands.

We’ve been serving Corrigan, TX, and the surrounding areas since 1983. Call us today to schedule an appointment! 

AC repair services

6 Tips for Hiring AC Repair Services in Corrigan, TX

By HVAC Expert | Air Conditioning Services

In East Texas, we rely on our central AC for far longer than homeowners in other parts of the country. With warm spring and fall seasons, many people find that they have to keep their AC running for more than half of the year to stay cool.

What you may not know is that in order to keep your AC in good shape, you should have it serviced about two times per year. That way, you address any necessary problems before they get worse and ensure that your HVAC system runs efficiently for years to come.

Hiring AC repair services can seem daunting at first. How do you know who to call? How do you find the best AC repair services in your neighborhood?

Read on for six tips that will make hiring AC repair services a breeze.

1. Familiarize Yourself with Your AC

The first thing you should do is familiarize yourself with your AC and HVAC system. What brand and model do you have? What are some of the signs, according to the manufacturer’s manual, that your AC or HVAC system requires repairs?

By learning more about your AC, you can better spot the signs that you need a tune-up. Even if you get in the habit of scheduling a twice-annual inspection, you may still need to schedule intermittent appointments to address specific issues. Doing so can keep a small, inexpensive problem from becoming a major, costly one.

Plus, some AC repair services are limited to certain brands. By knowing the basics about your AC, you can rule out any AC repair contracts that can’t service your AC.

2. Look for References and Referrals

One of the best ways to start your search for great AC repair services in your area is to ask around. Have your neighbors recently hired an AC repair contractor? If so, would they recommend that same contractor to you, or would they advise you to look elsewhere?

If you don’t know anyone who has hired AC repair services in the past year or two, you can always turn to online reviews. You can find online reviews on Google Review, Yelp, and the Better Business Bureau. By reading what other people have to say about a company, you can get a better sense of that company’s skills, professionalism, promptness, and pricing.

3. Seek Out Experience

Every year, new contractors enter the field of AC repair. Many start up their own businesses from scratch, and while being new to the field doesn’t mean that they won’t know what they’re doing, you can trust a company with years of experience. 

As you research different AC repair services near you, head to their About page to find out more about them. How long has the company been in business? Is it family-owned and operated, which often means a more personal touch, or is it part of a national chain?

There’s no reason to take a risk when hiring AC repair services. Find a company near you that has been in business for decades and you’ll get great results.

4. Check for Licensing and Insurance

In the state of Texas, AC repair contractors are legally required to receive and maintain a license in order to work in the field. This licensing establishes that they’ve completed the proper training and met the credentials established by the state of Texas. Just because it’s a requirement, however, doesn’t mean that everyone out there has their license, so double-check that you’re hiring a licensed AC repair contractor.

Getting a license also means that a Texas AC repair contractor has proven that they’re insured. When you’re hiring a contractor to work on any part of your home, verifying that they have insurance is an important way to protect yourself from liability. AC repair contractor insurance means that you and the contractor are covered if there is any damage done to your property or any injuries during the repair.

5. Find Out About Financing Options

What if you realize that you need more than AC repair in East Texas? What if upon inspection, your contractor realizes that you would benefit from buying a new HVAC system altogether? Oftentimes, repairing an old or worn-out AC can start to cost more than buying a new HVAC system, but that doesn’t mean that this new system will come cheap.

Make sure that you hire an AC repair company that offers financing so that you don’t have to find your own loan or take on credit card debt in order to live in comfort. Financing programs make it easy to pay off your new system on a monthly basis, and you never know when you may need it. 

6. Ask for Estimates

Only you know what your current budget looks like. By asking for estimates, you can make an informed choice based on how much you can afford to pay for AC repair services.

Keep in mind that the lowest-costing services may indicate poor workmanship. It’s equally important to remember that the highest-costing services aren’t necessarily the best ones in town. At Best Air, we work hard to provide fair, affordable prices without sacrificing quality work and products.

Come to Best Air for Your East Texas AC Repair Services

If you’re looking for AC repair services in Livingston, Point Blank, Cold Spring, Woodville, Corrigan, or Onalaska, you’ve come to the right place. Best Air has been working with the best technicians and specialists for over 35 years, and we’re proud to run a family-owned business that prioritizes the satisfaction of our clients.

To request an estimate or schedule an appointment, contact us today. We look forward to keeping your AC in great condition and providing you with the financing you need to replace your HVAC system when the time comes.

furnace maintenance

A Complete Guide to Furnace Maintenance in Corrigan, TX

By HVAC Expert | Preventative Maintenance

A home’s furnace is going to last somewhere between 15 and 20 years in most cases. But you might not be able to get that much life out of the furnace in your home if you don’t take furnace maintenance seriously enough.

While living in Corrigan, TX, you might be under the impression that you’ll only need to worry about doing air conditioner maintenance to avoid AC problems. This kind of maintenance can help you eliminate the need for AC repair services.

But it can get cold in Corrigan, TX at certain times of the year. So in addition to doing AC maintenance, you’ll also need to get into the habit of doing furnace maintenance from time to time.

Today, we’re going to talk to you about everything you need to know about furnace maintenance in Corrigan, TX. Find out more about it below.

What Is Furnace Maintenace?

Your home’s furnace is a very complex piece of equipment filled with all kinds of different parts. In order to keep your furnace up and running, you will need to work to maintain these parts so that they don’t break down on you.

Furnace maintenance is a process that involves providing the proper maintenance to a furnace to ensure that it’s ready to produce the warm air that your home needs. You will want to make maintaining a furnace a top priority to avoid unnecessary issues with your home’s heating system.

What Are the Steps Included in Furnace Maintenance?

There are a bunch of different things that will need to be done during furnace maintenance. If you skip any of the necessary steps, it could lead to furnace problems down the line.

Here are some of the steps that you’ll need to work your way through while doing furnace maintenance in Corrigan, TX:

  • Replacing a furnace filter
  • Removing dust and other debris from inside a furnace
  • Making sure the pilot light in the furnace is on
  • Cleaning the vents for a furnace
  • Listening out for any strange sounds from a furnace

Generally speaking, it shouldn’t take too long for furnace maintenance to be performed. But that doesn’t mean you should rush through the process. You’ll want to take your time to ensure that every aspect of a furnace is working as intended.

When Should Furnace Maintenance Take Place?

There is some debate over whether Corrigan, TX homeowners should do furnace maintenance at the beginning or end of the winter season. You’re free to do it at either time, but it’s usually a better idea to do it right before you know you’re about to start using your furnace.

If you maintain your furnace at the start of the winter, your furnace will be ready to roll when you need it. You shouldn’t have to worry about it not starting up when the temperature begins to drop.

How Often Should You Do Furnace Maintenance?

Unfortunately, there are some homeowners who will only get around to doing furnace maintenance in Corrigan, TX once every few years. They’re doing a huge disservice to their furnaces by taking this approach to maintaining them.

You should attempt to do furnace maintenance at least once each year. You should also try to tackle AC maintenance once each year, too, so that your home’s heating and cooling system is always in tip-top shape.

Should You Do Furnace Maintenance on Your Own?

There are some furnace maintenance steps that you might want to take on your own. For example, it’s easy enough to replace your furnace filter, which is why you should do this yourself. You should also replace your furnace filter yourself every three months or so to keep the air in your home clean.

Outside of doing that, though, you should turn to the professionals for help when it comes to doing furnace maintenance in Corrigan. Rather than opening up your furnace and poking around it, you should bring an HVAC pro in to handle the job.

An HVAC company will be able to pinpoint any problems that might be going on with your furnace. They’ll also be able to give you a better indication of which potential issues you might want to look out for in the coming months and years.

Who Should You Hire to Help You With Furnace Maintenance?

While it’s a great idea to hire an HVAC company to assist you with furnace maintenance, you don’t want to bring just any company on board. You should search for an experienced HVAC company that has a wonderful reputation within your community.

By allowing an HVAC company like this to work on your home’s furnace, you’ll know that it’s going to be in good hands. You’ll also be able to forge a great relationship with this company so that you know who to call on when you need furnace and AC repair services.

What Will Happen If You Don’t Take Care of Furnace Maintenance?

If you don’t take the time to maintain your home’s furnace, you will often have to spend more money making repairs to it over the life of your furnace. You also might find that you’ll need to replace your furnace ahead of schedule due to a lack of maintenance.

For these reasons, you shouldn’t ever put off doing furnace maintenance in Corrigan, TX. By maintaining your furnace, you’ll be able to keep it around for a much longer time. You’ll also sleep better at night knowing your furnace isn’t going to suddenly give out on you.

Contact Us for All Your Furnace Maintenance Needs in Corrigan, TX

Is it time for you to perform furnace maintenance in your home? If so, we would love to lend a hand to you.

We specialize in providing furnace maintenance in Corrigan, TX as well as many of the surrounding areas, including Livingston, Point Blank, Cold Spring, Woodville, and Onalaska. We can come to your home soon to take a look at your furnace and get it ready for the colder winter months.

Contact us now to schedule an appointment.

furnace

Best Time of Year to Replace Your Furnace in Onalaska, TX

By HVAC Expert | Service Area

Temperatures in Onalaska, Texas can often reach lows of around 40° Fahrenheit in the winter months. Although it’s rare, it can even get below freezing on particularly cold days.

It’s crucial to have your furnace in working order to make sure your HVAC system is ready for winter. While replacing your furnace system can be costly, it can often save you money in the long run.

As the machinery in your heating system wears down over time, it becomes less energy efficient. With enough maintenance issues, you may need to replace your HVAC system altogether to keep your home warm and save on your energy bill.

There’s no convenient time to replace your furnace, but some times of the year may be easier than others. Read on to learn the best time of year for a furnace replacement and what to look out for!

Furnaces: An Overview

If you aren’t well-versed in HVAC, you may be wondering what a furnace is and how it works.

In the United States, roughly two-thirds of homes use central heat and air. A central HVAC system typically uses one indoor unit and furnace as well as a system of ductwork that connects to each room.

A furnace, which runs on natural gas, oil, electricity, or propane, produces hot air that a fan forces into the ducts. The warm air then comes out of the vents and keeps each room warm.

Natural gas is the most commonly used fuel source for heaters, but each type of system can run into similar issues that may indicate you need a furnace replacement.

Signs You Need a Furnace Replacement

Replacing your furnace is a big decision, and it’s important to seek professional advice before making any big purchases. There are a few symptoms you should watch out for that may mean your furnace needs replacing.

Insufficient Heat

The most common sign of an issue with your furnace is that your home isn’t staying warm enough no matter how high you set the thermostat. Sometimes, this is a sign that your thermostat is having issues.

Your thermostat detects the temperature, then switches the furnace on and off to adjust how warm or cool it is. If your thermostat isn’t working properly, it may need a battery change or a replacement.

If your thermostat is working properly and your home still isn’t warm enough, the furnace is the most likely problem. Have a contractor inspect your system to determine if you need repairs or replacement.

Restricted Airflow

You might notice that when you turn the heat on, the vents produce very little warm air or no air at all. There are a few simple things that could cause this issue, so check your system if you’re experiencing restricted airflow.

Most often, restricted airflow is the result of a clogged filter or duct. Over time, ducts and air filters can get congested with dirt, dust, and debris.

If enough blockage builds up, it can stop your heating system from forcing warm air through the vents.

If your ducts and air filter look clean, it may be that the furnace got switched off. The furnace disconnect switch resembles an ordinary light switch, so it’s possible someone accidentally flipped it.

You should get your furnace diagnosed if flipping the disconnect switch has no effect.

Loud Noises or Odors

Symptoms like noises and smells can sometimes go unnoticed if the heater is in a secluded area of the home. It’s a good idea to look your system over from time to time to see if you notice anything odd.

Pounding and grinding noises are often an indicator of a mechanical issue with the furnace. It could be something as simple as a broken belt or faulty piece of hardware, but it may also mean your furnace is reaching the end of its lifespan.

On the other hand, your heating system may give off strange smells. A burning odor for a short time is normal after not running the heat for a few months, but if it persists, it can point to furnace issues.

More foul odors, like rotten egg smells, usually point to a gas leak, which can come from a crack in the furnace body.

Best Time of Year to Replace Your Furnace

You may think that the best time to replace your furnace is when it starts getting cold. However, there are benefits to replacing your furnace in the spring or summer when it’s still warm out.

Heating equipment is usually not in demand during the hot parts of the year. As a result, you usually get service more quickly and might even get a lower price.

Waiting until November when it’s already cold out could mean days or weeks of waiting for heating components. Spring and early fall are the best times to get your furnace replaced since you won’t be relying on your HVAC system as much.

While summer may seem like a good time for furnace replacement, it can be as bad as waiting for the winter. Getting any HVAC service, even heating repair, means your system won’t be running to keep your home cool while technicians test your heater.

Keep Your Home Warm This Winter

The best time to have your furnace replaced in Texas is during months with mild temperatures, like early spring and early fall. You should avoid having any HVAC equipment replaced when it’s extremely hot or cold outside.

Whether your heating issues are easy to fix or require a complete overhaul, we’ve got you covered. Best Air Conditioning and Heating has over 35 years of experience helping Onalaska customers with HVAC repair and replacement. 

Contact us today to learn how we can help you keep your HVAC system running smoothly!

ac repair cost

Common AC Repair Cost for Homeowners in Corrigan, TX

By HVAC Expert | Air Conditioning Services

The temperature in Corrigan, TX can reach an average high of 94°F or more. For this reason, if you’re a resident there, it’s important to keep your AC in its best shape. This will keep you and any other household residents comfortable in the summer heat. 

However, if your AC starts malfunctioning, you may hesitate to get it repaired. This is likely because you don’t know anything about the average AC repair cost. You may even believe that it will be too expensive for you to afford. 

Read on to learn more about the factors behind AC repair service costs. Hopefully, this information will ease your fears. If not, it should at least make you more prepared to foot the bill. 

AC Repair Cost Based on Type of Repair 

The average national AC repair cost is $392. However, your total price can end up being as low as $168 and as high as $617.

If this seems steep, know that it can cost far more to delay the repair and allow the problem to get worse. Replacing all the ductwork and central heating system can be more than $12,300. 

In general, though, the cost you’ll pay depends on the kind of repair work that needs to get done. As you may expect, the smaller and less complicated the component, the less you’ll pay to get it repaired. You can read the AC repair guide below to learn more about some different repair types and their costs. 

Replace an AC Fuse, Circuit Breaker, or Relay

Articles on AC repair tips cannot help you control what part of your AC breaks. However, if they could and you for some reason needed to break something, the fuse, circuit breaker, or relay would be the best choice.

Replacing any of these components can cost as low as $15 and the task can take only a few hours. However, keep in mind that the cost can also go as high as $300. 

Repair or Replace an AC Thermostat

The thermostat helps your AC measure the air temperature. This tells the AC that it’s finished its work and it can stop blowing air into a space. When the temperature gets too high again, the AC will turn on again to lower the temperature. 

Depending on parts and labor, you can expect to pay around $60 to $440 to replace a thermostat. If you want it repaired, you can expect to pay around $50 to $500. Try to work with the AC technician and ask what price would be better. 

Repair or Replace an AC Condenser 

A condenser is one of the more important and larger parts of a complete AC system. Its job is to convert refrigerant gasses into liquid. This process releases the heat that collects in your home. 

You can expect a big price tag for any service work related to this component. A replacement can cost from $650 to $1,300 depending on if the unit is under warranty or not. The most common repairs can cost between $900 to $2,800. 

Type of AC Unit in Home 

Another common piece of AC repair advice with regards to cost is to check the type of AC unit you have. Once you’ve figured this out, you may have a better idea of what an AC repair service is going to cost you. Below you’ll find a list of some AC unit types and their average repair costs. 

Window 

A window AC unit is often a lot smaller and simpler than other models. For this reason, it costs a lot less to repair it. You can expect to pay only around $50 to $120 to repair this unit. 

Central 

A central AC unit is a lot bigger and more complicated than a window unit. It blows air into several different rooms at once via fans and/or ducts. $100 to $500 is the average cost for a repair on this unit. 

Ductless Mini

A ductless mini doesn’t need ducts to do its work and only cools one room at a time. Despite this apparent simplicity, repairs on this unit can get rather pricey. Except to pay around $750 to $900 per repair. 

Other Kinds of AC Repair Costs 

Many of the costs of AC repair don’t have anything to do with the types of AC units you have. There are plenty of services related to repair that you’ll still need to pay for. Beyond that, the circumstances of when and where you need your repairs can also play a factor.

Labor Costs 

Many AC repair companies charge by the hour on top of the cost of parts. These prices are often competitive. If you’re in a place with less competition and/or need a repair during a busier season or inconvenient time, you’ll likely pay more in this area. 

You can expect to pay around $75 to $150 per hour. Service during the holidays or after-hours will cost around $160 to $250 per hour. 

Troubleshooting

It takes time for an AC technician to inspect your AC unit and figure out the exact problem it’s having. For this reason, you can expect to pay them for this time. You can expect to pay around the same as the per-hour labor costs mentioned above. 

Maintenance 

If you wish, you can hire an AC technician to perform maintenance on your unit. This can prevent larger and more expensive faults from occurring. You can expect to pay around $80 to $100 for this kind of visit. 

For the Best Heating and Cooling Services in Several Texas Locations, Call Us

In sum, the AC repair cost you pay can be a lot. However, if you get smaller issues diagnosed and repaired quickly, it will probably cost you a lot less. 

When you need AC repair services, consider utilizing our top-notch workmanship performed by our clean-cut professional technicians. Along with Corrigan, we also operate in other Texas locations such as Livingston, Point Blank, Woodsville, and Onalaska. Contact us today for a free price estimate. 

hiring HVAC repair services

7 Benefits of Hiring HVAC Repair Services in Cold Spring, TX

By HVAC Expert | Air Conditioning Services

 

Across the United States, people spend more than $120 billion every year on the services of contractors for heating and air conditioning. There are more than 566,000 people employed in the HVAC contractor industry that takes care of our HVAC systems.

It surprises people to find out that hiring HVAC repair services in a prompt manner might actually decrease the total value of the contractor industry. This paradoxical truth comes from the fact that many people end up paying more for repairs or replacements when they put them off.

Receiving timely HVAC repair and maintenance can save you money and provide a long list of other benefits. Read on to learn all about the most important reasons to hire HVAC repair services!

1. Enjoy Professional HVAC Repair Experience

Some people have a custom of fixing things up around their house on their own. Although this is admirable, it is important to know which kinds of home maintenance are best left to the professionals.

HVAC systems are complicated and can be dangerous. Heating systems and air conditioning systems alike have sensitive electric systems. It takes special training to know how to manage them without putting yourself in danger. It is also possible that do-it-yourself maintenance can leave the electrical system set up in a way that may increase the risk of a fire.

You should also keep in mind that air conditioning systems often contain dangerous chemicals and gases that need to be avoided. When it comes to HVAC repair, you should rely on the experts. For some maintenance tasks, like changing the air filter, you can handle things on your own.

2. Repairing HVAC Units Extends Their Lifespan

Not everybody realizes what contributes to the lifespan of an HVAC system. When a system has to run constantly, it wears out faster than it has to. Many HVAC systems have to run all of the time because they do not have the same power that they used to.

In other cases, a malfunction will lead to an HVAC system running in an inefficient way that will increase wear and tear. You should also keep in mind that when one part of the system is broken, the other parts of the system may experience extra stress. That means that what starts as a single problem can multiply into many problems.

Not only will this decrease the lifespan of your units, but it may increase your repair costs. Fixing problems when they are small is more affordable than waiting for them to become so bad that your system does not work at all.

3. Common HVAC Issues Increase Energy Consumption

Most people do not appreciate just how much of their energy consumption comes from their HVAC units. In particular, air conditioning alone can sometimes be responsible for half of the energy use of an entire household! Of course, this is common in hotter places like Texas.

Many times, HVAC systems work worse and worse, and energy bills go up and up. However, this can happen gradually, so people do not always notice it.

If your energy bills have been getting higher, it is possible that the cause is an HVAC system that is using more energy than it has to. HVAC repairs can help your system work with maximum efficiency.

4. Enjoy Cleaner Air From Your Residential HVAC System

In many homes, the HVAC system functions as an air filtration system at the same time. Your HVAC system processes huge quantities of air. As it funnels this air throughout your home, it has to make sure that it does not fill your home with contaminants.

To achieve this, your HVAC system will have a number of filters. It will also have other design aspects that contribute to excellent indoor air quality.

This is another problem that often comes on in a gradual way. After receiving quality HVAC repairs, you might notice that the air in your home smells fresher. Not only does this make your home more comfortable, but it can avoid provoking respiratory problems in people with chronic health considerations like asthma.

If you have members of your household that experience dry throats on occasion, the cause may be poor air quality due to an HVAC system that needs repairs.

5. Save Money With a Wise HVAC Repair Budget

We already talked about how proper HVAC repairs can help your units last longer. Since you will not have to replace your units as soon, that can save you money. However, that is only one way that HVAC repair can save you money.

Having a more efficient HVAC system will decrease your monthly energy bills. That is especially important as energy prices go up for one reason or another. When there are times of inflation, saving money is even more important.

HVAC repair experts may also be able to help you set up a smart thermostat system. That will help your HVAC system to control the temperature of only certain rooms of the home at certain times of day or night.

With the right choices, you can keep your home perfectly comfortable for everyone in it without having to pay more than you have to.

Understand the Benefits of Hiring HVAC Repair Services

We hope learning about the benefits of hiring HVAC repair services has been helpful. Many people feel that they are trading off between cost and comfort at home when they delay HVAC maintenance or repair. The truth is that savvy repairs often save you money as well as provide you with greater comfort.

To learn more about HVAC repair services and where you can find HVAC experts to help you, feel free to reach out and get in touch with us here at Best Air Conditioning and Heating in Cold Spring, Texas!

ac efficiency

AC Working Overtime? 7 Ways to Improve AC Efficiency in Point Blank, TX

By HVAC Expert | Air Conditioning Services

If you’ve lived in Texas for a while, you already know our scorching summers are nothing to laugh at—and those hot temperatures are already climbing in 2022. We’ve seen record-shattering highs across the state, from San Antonio to Galveston, and summer’s just beginning. In other words, you can be forgiven if you’re worried your air conditioner can’t keep up with our extreme climate! Fortunately, there are plenty of things you can do to improve your AC efficiency, ensuring that you can rely on it even on the hottest days of the year.

For a few quick tips to preserve your AC while protecting your wallet, read on.

1. Find Your Ideal Temperature

If you want to balance efficiency with savings, finding the right temperature can help. According to Energy Star, setting your thermostat at 78 degrees when you’re home can be ideal for both your comfort and your wallet. When you’re asleep, that number should hover at around 82 degrees, and you can set it even higher than that when you’re away from home.

Of course, these temperatures won’t be ideal for all homeowners, so it’s important to find your own sweet spot. Play around with your thermostat’s settings until you find the warmest temperature that keeps you and your household comfortable.

2. Automate Your Thermostat

Knowing your perfect summer temperatures can be helpful, but most of us won’t remember to adjust the thermostat as often as we should. That’s where your programmable settings come in.

Make sure that your thermostat is set to automatically regulate your home’s temperature when your family is at home, sleeping, away for the day, or even traveling on vacation. If you’ve already done this, don’t forget that a change of seasons is a good time to double-check your timing, especially if you have children who are spending more time at home during the day.

3. Check Your Air Filters

Changing your air filters might feel like a tedious chore you can postpone, but these simple devices play a huge role in your HVAC efficiency. When your filters grow clogged, it’s harder for your unit to circulate cool air throughout your home. Worse, the air that it does circulate will be riddled with indoor pollutants, including pollen, dust, and pet dander.

Experts recommend that you change your air filter at least once every three months, though you may want to check it more often than that. Depending on your household makeup, you may need more frequent changes, especially if anyone under your roof has respiratory or health issues. When you replace your filter, make sure to opt for a high-quality filter with a solid MERV rating.

4. Inspect Your Vents

Though you may not think of this task when performing your regular HVAC maintenance, it’s important to check the vents and registers throughout your home every now and then. Just like with your air filters, an accumulation of dust and debris in these areas can make it harder for your AC to circulate cool air.

To prevent this, be sure to dust or vacuum your vents as needed. You’ll also want to check for any household materials that may be blocking your vents, including rugs, window treatments, and furniture.

5. Clean Your Outdoor Unit

Your outdoor unit takes a beating throughout the year, so it’s crucial to check on it to ensure efficiency. We recommend doing this twice per year: once before you start relying on your AC for summer cooling, and once before you need the furnace for winter heating.

Trim any plant growth around the area, including weeds and bushes, and do a quick visual inspection to make sure that your outdoor unit is still level.

If you feel comfortable doing so, you can also cut the power to the AC and remove the panels. Look inside your unit to check for bent or damaged fins, hosing them down to remove any debris. You should also clean and rinse the condenser coils.

6. Improve Your Insulation

One subtle culprit in the fight for more HVAC efficiency is poor insulation. If there are air leaks in your home, all the cool air you’re paying for is constantly escaping!

Break out your caulk and seal any gaps around your windows and doors, and address any exposed ductwork. You may also want to consider weather stripping and door draft stoppers. Don’t forget to check the insulation in areas like your attic and basement, both of which are prone to air leaks.

7. Call an Expert for Maintenance

If you’re hoping for better air conditioning efficiency, the best way to get it is by checking with an expert.

Getting regular preventative AC maintenance once or twice a year can ensure that every part of your system is working properly when you need it most. It’s also a good way to identify small issues that can chip away at your AC’s efficiency—or, worse, snowball into something that requires major repairs.

Let Us Enhance Your AC Efficiency

If you’re struggling to improve your AC efficiency, the tips and tricks above can be a great way to get started. Though some of them may seem simple, these small steps help you extend your system’s lifespan while reducing your utility bills.

Beyond the quick fixes above, be sure to partner with us for assistance with your air conditioner this summer and beyond! We’ve gained a reputation as the trusted team for Point Blank, Cold Spring, Woodville, Corrigan, Onalaska, and Livingston HVAC repair and maintenance. To learn how we can improve your air conditioning, reach out to us today.

common HVAC repair mistakes

7 Common HVAC Repair Mistakes to Avoid for Livingston Homeowners

By HVAC Expert | Air Conditioning Services

Do you know that the average American household pays more than $104 per month on energy? The air conditioning system they have installed is one of the largest contributors to that cost.

Though you won’t be able to totally reduce your air conditioning system’s energy use, there are steps you can do to ensure it functions as efficiently as possible. It all comes down to performing regular maintenance throughout the year.

Although maintenance is critical, many Livingston homeowners make mistakes when it comes to keeping their systems in good working condition. Here are seven of the most common HVAC repair mistakes, as well as what Livingston homeowners can do to avoid them.

1. Wrong Size Air Filters

When repairing your Livingston residential HVAC system, most mistakes will occur due to the size of the air filters. Many filters exist for you to buy and change the one at home.

What you want is a perfect size that will fit your HVAC system. But, sometimes, the wrong air filters fit, and you might think the job is perfect.

Just because the air filter fits does not mean it will perform and function correctly. And, when the system does not filter air properly, your allergies might worsen.

The dirt and dust your air filters miss might accumulate in your HVAC system. The accumulation reduces the HVAC system’s effectiveness. So, cleaning your HVAC systems is inevitable.

Though changing the air filters is easy, some filters and systems will need professional help. If you ever choose to go ahead unprepared, you may have to pay more for your HVAC repair costs.

Contract AC service provider to guide you in buying the perfect air filter for your HVAC. HVAC contractors know the right MERV rating and size specifications for your HVAC system.

2. Ignoring the Thermostat

When you’re having trouble with your heating and cooling at your home, you should first check the thermostat. The thermostat regulates the HVAC system functions.

Once it malfunctions, you might think something is wrong with your HVAC system. So, always check your thermostat first to know if there is a problem with your heating and cooling system.

Also, there are many consequences of a wrong thermostat installation. Note that these consequences might go unnoticed.

For instance, receiving an electrical shock is at the top of the consequences list. An incorrect installation might also blow out your circuit breaker and damage your thermostat unit and HVAC system.

Also, when deciding the thermostat that might work for your system, there are various variables to consider. Your HVAC system might use a digital or mechanical room thermostat for basic area temperature management.

Common HVAC issues will arise when you ignore or decide to go DIY on your thermostat repair or replacement. So, ensure you have an expert HVAC service provider by your side to assist you.

3. Hiring an Inexperienced HVAC Contractor

Don’t underestimate the importance of hiring HVAC experts. Always check on the team’s skills and experience to confirm that your HVAC system repair will be without errors.

Unfortunately, the increased demand for HVAC units brings about self-proclaimed contractors. That makes it hard for Livingston homeowners to choose the right HVAC expert.

But, doing your due diligence will help you find the right HVAC Company.

4. Ignoring Your Furnace Sounds

The sounds your furnace emits when it kicks on should not last more than a few seconds. When you notice they are lasting longer, that is a cause for concern.

A good example is scraping sounds. They are due to the dry HVAC bearing scraping against the motor. When you ignore the sounds, they will eventually increase your HVAC repair budget.

Lubricating your bearings will prevent these damages. You may fix the scraping sound or hire an HVAC professional.

But, a maintenance plan will be more effective in the long run.

5. Deciding to Duct Tape

Duct tape is an excellent tool but isn’t always a solution. One common HVAC repair mistake involves duct tape.

For instance, duct-taping a small furnace leak is not a good idea since manufacturers don’t intend it for that specific purpose. Also, the adhesive weakness and hardness once exposed to varying temperatures.

If you go with duct tape, ensure you use duct tape with aluminum foils. Instead of duct tape, use an HVAC sealant or caulk to fix furnace leaks.

6. Choosing Your Repair Contractor Based on Price Only

Consider your HVAC repair budget since each HVAC system eventually needs repair. Though it’s crucial to shop around and receive estimates from varying HVAC contractors, never make your decision based on price.

You will always get what you’re worth when it comes to the quality of HVAC repair. Choosing the lowest rate often leads to low-quality services.

Work with an HVAC contractor with experience working on your type of unit. You may pay slightly more but will have a better service and will not have to worry about paying for that repair twice.

7. Ignoring the Condenser Coils

Outdoor AC coils experience grime, fur, and dust buildup like the ones on your fridge. Cleaning the HVAC condenser coil is always a delicate process that you should approach with care.

To avoid these HVAC repair mistakes, hire an HVAC expert to assist with your coiling cleaning. Experts know how to clean HVAC systems and will use specialized detergents to dissolve the grime.

Deciding to DIY might break down the coil with time, leading to long-term damage to your HVAC system.

Avoid the Above Common HVAC Repair Mistakes

HVAC systems are vital installations in your Livingston home. They help in maintaining comfortable temperatures and improving air quality.

But, common HVAC repair mistakes might impede your system’s efficiency. That is why we recommend working with experienced HVAC companies.

At Best Air Conditioning and Heating, we will provide you with a top-notch air conditioning and heating service. Our wide range of cooling and heating services will ensure you and your family have the highest comfort level.

Contact us today to experience the best HVAC repair service.

electric bill

Cold Spring, TX Summer Electric Bill: Cool Ways to Save Money

By HVAC Expert | Air Conditioning Services

Most people dread paying their energy bills each month, especially during the summer. The average electric bill costs approximately $115.49 each month in the United States.

Due to the high temperatures, these costs can be far more expensive in places like Cold Spring, Texas.

Therefore, you must conserve energy to save money on your electric bill each summer.

Learning how to cool your home efficiently also plays a part in your expenses. So keep reading if you’re worried about the cost of your summer electric bill this year.

Insulation

Insulation plays a massive role in maintaining a comfortable temperature in your home. It works as a barrier to keep heat out during summer and heat in during winter.

As temperatures are harder to maintain without proper insulation, your air conditioner works harder to cool your home. Installing adequate insulation can make summers easier on your HVAC system overall. This installation will also lengthen its lifespan and lessen the need for repairs.

Insulation will keep cool air inside longer, keeping your air conditioner from overrunning. The more your cooling system runs, the higher your electricity bill becomes.

Monitor Weather

East Texas is known for having unpredictable weather patterns. Conditions can change quickly, making it difficult for HVAC systems to adapt. This difficulty is due to drastic temperature and humidity changes.

Your HVAC system can use lots of energy while working to reach a comfortable temperature. Air conditioners or heaters will often constantly run until the desired temperature is met. This will cause your energy costs to rise significantly.

The best way to battle these costs is to monitor the weather often. Change your HVAC settings before the temperature changes, giving your system time to adjust.

Update Appliances

Many people think they are saving money by using older appliances and not buying new ones. Unfortunately, older devices may use more energy and are not efficient. You can save more money by investing in new machines.

A high electric bill can benefit from modern appliances since they use less electricity. Energy Star certified appliances are the best option for those wanting a lower electric bill. This certification also helps the environment by providing sustainable energy consumption.

Shut Things Off

Most people use electricity with lighting, electronics, and appliances throughout the day. However, some users forget to shut things off after use. This thoughtlessness can cause your electricity bill to increase if done often.

Always turn things off as soon as you’re done using them. These savings will add up and result in a lower electric bill as time goes on.

Vampire Appliances

Vampire appliances are devices that still use energy when plugged in and are not in direct use. These devices create wasted energy that adds up on your monthly bill. For example, coffee pots, microwaves, game consoles, etc., are all considered vampire appliances.

You can reduce your electric bill by unplugging these devices after use. This may seem like a hassle, but it can save you lots of money throughout the year.

Clean Obstructed AC Units

It’s no secret that AC units take up large amounts of energy during the summer. Therefore, you always want your HVAC system to be working efficiently. Many homeowners neglect these systems, ending up with dirty or obstructed ventilation.

Cleaning your system is beneficial for energy use and your health. A dirty system can blow particles into your home, making breathing conditions unhealthy.

AC vents often get obstructed within many homes, and furniture is usually the leading cause. Placing anything in front of a vent causes your AC to work in overdrive to provide a cool environment. This will then cause your electric bill to increase until the obstruction is removed.

Use Ceiling Fans

AC units are great for cooling the entire home but are not efficient. Instead, you can lower energy bills by using ceiling fans. Ceiling fans are great for those that spend most of their time in a few rooms and not the whole house.

Ceiling fans will move the air in the room, making it feel cooler overall. These fans are great for those that live in East Texas due to the cooler air in the evenings. Ceiling fans and this environment can reduce your need for air conditioning.

Change to LED Bulbs

Changing to LED light bulbs is a great way to conserve energy. LED bulbs use significantly less energy than incandescent bulbs and still create the same lighting. As less energy is used throughout your home, your electric bill will reduce.

LED bulbs also last much longer than incandescent bulbs, meaning you won’t have to change bulbs out near as often. This change can save you money since LED bulbs can last up to 100,000 hours more than incandescents.

Smart Thermostat

Traditional thermostats rely on you to manually input the desired temperature and change it when required. This can waste energy when you’re not home if the AC runs without being needed.

A smart thermostat can save you money on your monthly electric bills. These thermostats gather information and make adjustments to cool your home. You do not need to make any inputs as it automatically adjusts based on your needs.

Lower Your Electric Bill This Summer

These recommendations will help reduce your electric bill during summer and save more money. Conserving energy helps you financially and helps create a cleaner environment.

Don’t forget to contact us today if you’re located in the Cold Spring area! Best Air Conditioning and Heating will help with your cooling needs this summer.